fuse accessories
• Trip Indicator - Trip-indicator fuselinks are available for use in
parallel with the main fuselinks. They can either be attached to the
associated fuselink or mounted separately in panel mounted fuse clips,
Part No. CL1. A push-on adapter and microswitch attachment is available
for use with the trip indicator to give the facility of remote
indication, reference MAI or MBI.
Fuse ratings of 20A and below cannot usually accommodate a trip fuselink
in parallel.
Where trip indicator fuselinks are to be attached to the main fuselink,
an accessory pack comprising a pair of mounting clips and an appropriate
trip indicator fuselink will be required.
The ordering code references for these packs are listed below:
Ferrule
fuse accessories
• Fuse Blocks - J70100 - Fuse holder for use with 22 x 58mm fuses
(FWP-40A22F,
FWP-100A22F, etc.)
• Fuse Holders - CH Series - DIN rail mount fuse holders for high speed
fuses.
FWA 150V: 5-60A
• FWA 5-30A (10 x 38mm) 35-60A (21 X 51mm) - Ferrule style high speed
fuses.
FWC 600V: 6-32A
• FWC (10 x 38mm) - Ferrule style high speed fuses.
FWH 500V: 0.25-30A
• FWH (6 x 32mm) - Ferrule style high speed fuses.
FWH 500V: 1-30A
• FWH (14 x 51mm) - Ferrule style high speed fuses.
FWJ 1000V: 20-30A
• FWJ (14 x 67mm) - Ferrule style high speed fuses.
FWK 750V: 5-60A
• FWK 5-30A (20 x 127mm 35-60A (25 x 146mm) - Ferrule style high speed
fuses.
FWL 1250V/1500V/2000V: 20-30A
• FWL 20-30A (20 x 127mm) - Ferrule style high speed fuses.
FWP 690V/700V (IEC/UL): 20-100A, striker optional
• FWP (22 x 58mm) - Ferrule style high speed fuses. with and without
indicating striker.
FWP 690V/700V (IEC/UL): 5-50A, striker optional
• FWP (14 x 51mm) - Ferrule style high speed fuses with and without
indicating striker.
FWS 1250V/1500V/2000V: 2-15A
• FWS 2-15A (20 x 127mm) - Ferrule style high speed fuses.
FWX 250V (UL): 1-50A
• FWX (14 x 51mm) - Ferrule style high speed fuses.
North American
FWA 130V: 1000-4000A
• FWA - 130V - North American style flush-end high speed fuses.
FWA 150V: 70-1000A
• FWA - 150V - North American style stud-mount fuses.
FWH 500V: 35-1600A
• FWH - North American style stud-mount fuses.
FWJ 1000V: 35-2000A
• FWJ - North American style stud-mount fuses.
FWP 700V: 5-1200A
• FWP - North American style stud-mount fuses.
FWX 250V: 35-2500A
• FWX - North American style stud-mount and flush-end fuses.
KAC 600V: 1-1000A
• KAC - North American style stud-mount fuses. These 600V fuses are
supplied as replacements only. For new installations, Cooper Bussmann
recommends the 700V FWP series fuse.
KBC 600V: 35-800A
• KBC - North American style stud-mount and flush-end fuses. These 600V
fuses are
supplied as replacements only. For new installations, Cooper Bussmann
recommends the 700V FWP series fuse.
Square body
fuse accessories
• Fuse Bases (Blocks) - For the Typower ZILOX fuses according to DIN 43
653
• Indicator Systems (DIN 43 620) - Typower ZILOX fuses are available
with three different
indicator systems.
1. Visual Indicator
The indicator situated in one cover plate is clearly visible as soon as
the fuse has operated. The minimum voltage for operating the indicator
is 20V.
2. Type T Indicator
The indicator is situated on one cover plate with a cover plate tag to
accommodate an auxiliary switch. The minimum voltage for operating the
indicator is 20V. A special low
voltage indicator (1.5V) is available on request.
3. Type K Indicator
This indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of an auxiliary switch. The operating voltage of
the indicator is 1.5V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
• Indicator Systems (DIN 43 653) - Typower ZILOX fuses are available
with three different
indicator systems.
1. Visual Indicator
The indicator situated in one cover plate is clearly visible as soon as
the fuse has operated. The minimum voltage for operating the indicator
is 20V.
2. Type T Indicator
The indicator is situated on one cover plate with a cover plate tag to
accommodate an auxiliary switch. The minimum voltage for operating the
indicator is 20V. A special low
voltage indicator (1.5V) is available on request.
3. Type K Indicator
This indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of an auxiliary switch. The operating voltage of
the indicator is 1.5V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
• Indicator Systems (Flush End) - Typower ZILOX fuses are available with
three different
indicator systems.
1. Visual Indicator
The indicator situated in one cover plate is clearly visible as soon as
the fuse has operated. The minimum voltage for operating the indicator
is 20V.
2. Type T Indicator
The indicator is situated on one cover plate with a cover plate tag to
accommodate an auxiliary switch. The minimum voltage for operating the
indicator is 20V. A special low
voltage indicator (1.5V) is available on request.
3. Type K Indicator
This indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of an auxiliary switch. The operating voltage of
the indicator is 1.5V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
• Indicator Systems (French Style) - Typower ZILOX fuses are available
with three different
indicator systems.
1. Visual Indicator
The indicator situated in one cover plate is clearly visible as soon as
the fuse has operated. The minimum voltage for operating the indicator
is 20V.
2. Type T Indicator
The indicator is situated on one cover plate with a cover plate tag to
accommodate an auxiliary switch. The minimum voltage for operating the
indicator is 20V. A special low
voltage indicator (1.5V) is available on request.
3. Type K Indicator
This indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of an auxiliary switch. The operating voltage of
the indicator is 1.5V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
• Indicator Systems (US Style) - Typower ZILOX fuses are available with
three different
indicator systems.
1. Visual Indicator
The indicator situated in one cover plate is clearly visible as soon as
the fuse has operated. The minimum voltage for operating the indicator
is 20V.
2. Type T Indicator
The indicator is situated on one cover plate with a cover plate tag to
accommodate an auxiliary switch. The minimum voltage for operating the
indicator is 20V. A special low
voltage indicator (1.5V) is available on request.
3. Type K Indicator
This indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of an auxiliary switch. The operating voltage of
the indicator is 1.5V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
• Microswitch - The Typower ZILOX fuses with either type T indicator or
type K indicator can be equipped with a microswitch for remote
electrical indication of fuse operations. All micro-switches have one
normally open and one normally closed contact. Ratings are 2A, 250Vac.
Square body DIN 43 620
1000V (IEC)
• 20-225A (Type T Indicator for Micro) - Square body DIN 43 620 blade
style high speed fuses.
690/700V (IEC/UL)
• 40-1000A (DIN Type T Indicator for Micro) - Square body DIN 43 620
blade style high speed fuses.
690V (IEC)
• 10-800A (Type T Indicator For Micro) - Square body DIN 43 620 blade
style high speed fuses.
690V (IEC/UL)
• 690V (IEC/UL) 10-315A - Square body DIN 43 620 blade style high speed
fuses.
Square body DIN 43 653
1000V (IEC)
• 20-315A (00/80 Visual Indicator) - Square body DIN 43 653 stud-mount
high speed fuses.
• 20-315A (00TN/80 Type T Indicator for Micro) - Square body DIN 43 653
stud-mount high speed fuses.
• 50-1400A (-KN/110 Type K Indicator for Micro) - Square body mount high
speed fuses.
• 50-1400A (-TN/110 Type T Indicator for Micro) - Square body mount high
speed fuses.
1250V/1300V (IEC/UL)
• 50-1400A (-/110 Visual Indicator) - Square body DIN 43 653 stud-mount
high speed fuses.
• 50-1400A (-KN/110 Type K Indicator for Micro) - Square body DIN 43 653
stud-mount high speed fuses.
• 50-1400A (-TN/110 Type T Indicator for Micro) - Square body DIN 43 653
stud-mount high speed fuses.
690V/700V (IEC/UL)
• 10-400A (-/80 Visual Indicator) - Square body DIN 43-653 stud mount
high speed fuses.
• 10-400A (-TN/80 Type T Indicator for Micro) - Square body DIN 43-653
stud mount high speed fuses.
• 10-400A (-U/80 Without Indicator) - Square body DIN 43-653 stud mount
high speed fuses.
• 40-2000A (-/110 Visual Indicator) - Square body DIN 43 653 stud-mount
high speed fuses.
• 40-2000A (-/80 Visual Indicator) - Square body DIN 43 653 stud-mount
high speed fuses.
• 40-2000A (-KN/110 Type K Indicator for Micro) - Square body DIN 43-653
stud-mount high speed fuses.
• 40-2000A (-KN/80 Type K Indicator for Micro) - Square body DIN 43-653
stud-mount high speed fuses.
• 40-2000A (-TN/110 Type T Indicator for Micro) - Square body DIN 43 653
stud-mount high speed fuses.
• 40-2000A (-TN/80 Type T Indicator for Micro) - Square body DIN 43 653
stud-mount high speed fuses.
Square body flush end contact
1000V (IEC)
• 50-1400A (-BKN/-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
• 50-1400A (-GKN/-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
1250V/1300V (IEC/UL)
• 50-1400A (-BKN/75-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
• 50-1400A (-BKN/80-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
• 50-1400A (-BKN/90-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
• 50-1400A (-GKN/75-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
• 50-1400A (-GKN/90-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
690V (IEC)
• 1000-4000A (-B/- Visual Indicator) - Square body flush end contact
high speed fuses.
• 1000-4000A (-BKN/-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
• 1000-4000A (-G/-Visual Indicator) - Square body flush end contact high
speed fuses.
• 1000-4000A (-GKN/-Type K Indicator for Micro) - Square body flush end
contact high speed fuses.
• 25-400A (00B/60 Visual Indicator) - Square body flush end contact high
speed fuses.
• 25-400A (00BTN/60 Type T Indicator for Micro) - Square body flush end
contact high speed fuses.
690V/700V (IEC/UL)
• 40-2000A (-B/- Visual Indicator) - Square body flush end contact high
speed fuses.
• 40-2000A (-BKN/- Type K Indicator For Micro) - Square body flush end
contact high speed fuses.
• 40-2000A (-G/-Visual Indicator) - Square body flush end contact high
speed fuses.
• 40-2000A (-GKN/-Type K Indicator For Micro) - Square body flush end
contact high speed fuses.
Square Body French Style
690V/700V (IEC/UL)
• 40-1500A (-E/ Type T Indicator for Micro) - Square body French style
high speed fuses.
• 40-1500A (-EKN/- Type K Indicator for Micro) - Square body French
style high speed fuses.
Square Body US Style
1000V (IEC)
• 50-1400A (-FKE/115 Type K Indicator for Micro) - Square body US style
high speed fuses.
1250V/1300V (IEC/UL)
• 50-1400A (-FKE/115 Type K Indicator for Micro-US) - Square body US
style high speed fuses.
• 50-1400A (-FU/115 Without Indicator-US) - Square body US style high
speed fuses.
690V/700V (IEC)
• 40-2000A (-FKE/-Type K Indicator for Micro) - Square body US style
high speed fuses.
• 40-2000A (-FKE/115 Type K Indicator for Micro) - Square body US style
high speed fuses.
• 40-2000A (-FU/- Without Indicator) - Square body US style high speed
fuses.
• 40-2000A (-FU/115 Without Indicator) - Square body US style high speed
fuses.