BS 88 British
Standard
low voltage fuses
• AAO BS 88 Part 1 - AAO types are low voltage fuses complying with
general purpose gG characteristics.
• AC BS 88 - Low voltage fuses that comply with general purpose gG
characteristics and available up to 400A rolex replica with two hole mount and up to
1250A with four hole mount.
• AD BS 88 - Low voltage fuses that comply with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• BAO BS 88 Part 1 - BAO types are low voltage fuses complying with
general purpose gG characteristics.
• BC BS 88 - Low voltage fuses that comply with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• BD BS 88 - Low voltage fuses that comply with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• CD BS 88 - Low voltage fuses that comply with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• CEO BS 88 Part 1 - CEO types are low voltage fuses complying with
general purpose gG characteristics.
• DD BS 88 - Low voltage fuses that comply with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• DEO BS 88 Part 1 - DEO types are low voltage fuses complying with
general purpose gG characteristics.
• ED BS 88 - Low voltage fuses that comply with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• EF BS 88 - Low voltage fuses complying with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• EFS BS 88 - Low voltage fuses that comply with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• ESD BS 88 Part 1 - The ESD are low voltage fuses complying with
general purpose gG characteristics.
• FF BS 88 - Low voltage fuses complying with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• FG BS 88 - Low voltage fuses complying with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• GF BS 88 - Low voltage fuses complying with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• GG BS 88 - Low voltage fuses complying with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• GH BS 88 - Low voltage fuses complying with general purpose gG
characteristics and available up to 400A with two hole mount and up to
1250A with four hole mount.
• NITD BS 88 Part 1 - The NITD types are low voltage fuses complying
with general purpose gG characteristics.
• NSD BS 88 Part 1 - The NSD are low voltage fuses complying with
general purpose gG characteristics.
• OSD BS 88 Part 1 - OSD types are low voltage fuses complying with
general purpose gG characteristics.
CSA
Time-Delay CSA Type D fuses
• CDN - CSA time-delay Type D fuses.
• CDS - CSA time-delay Type D fuses.
Time-Delay CSA Type F fuses
• PON - CSA time-delay Type P fuses.
DIN style Type D
low voltage fuses
• D125 Type D - DIN style Type D low voltage fuses.
• D16 Type D - DIN style Type D low voltage fuses.
• D27 Type D - DIN style Type D low voltage fuses.
• D33 Type D - DIN style Type D low voltage fuses.
• NZ01 Type D0 - Low voltage Neozed fuses suitable for use on 250Vdc
systems.
• NZ02 Type D0 - Low voltage Neozed fuses suitable for use on 250Vdc
systems.
HRC
fuse holders
• CAMaster - The CAMaster HRC fuse holder features a unique cam-action
for easy fuse removal while allowing significantly improved
contact pressure between fuse carrier and base
contact that enhances electrical performance. A range of lockable safety
carriers for the fuse holder (catalog reference: LSC), are available.
• CAMaster Accessories - The CAMaster HRC fuse holder features a unique
cam-action for easy fuse removal while allowing significantly improved
contact pressure between fuse carrier and base
contact that enhances electrical performance. A range of lockable safety
carriers for the fuse holder (catalog reference: LSC), are available.
• SAFEloc - The SAFEloc HRC fuse holders (for use with HRCI-CB fuses)
provides a positive, stress-free fuse fitting and locks it in position
to ensure safe insertion and
withdrawal from the base. Base contacts are fully shrouded to help
protect against electric shock. Shrouds utilize simple slide/snap action
allowing access to the contact
terminal screws.
HRC FORM II
current-limiting fuses
• HRC Form II - HRC Form II current-limiting fuses.
HRCI
industrial ceramic body fuses
• CIF06 HRCI-CB - A miniature industrial fuse that provides both
short-circuit and overload
protection and the CIF06 fits the 30A SAFEloc fuse holder.
• CIF21 HRCI-CA - The HRCI-CA fuse provides both overload and
short-circuit protection to HRCI requirements. Offset blades for bolt-on
mounting. CIF21 fuse fits the Cooper Bussmann-CAMaster fuse holder.
J fast-acting fuses
• CJ HRCI-J - HRCI-J fast-acting fuses are industrial duty fuses with
the excellent current-limiting characteristics of fast-acting HRCI-J
fuses to limit damage to equipment and installations by the thermal and
magnetic energy associated with a large short-circuit fault current.
Overload characteristics limit cable damage due to low
overload currents.
miscellaneous Type K fuses
• CIH HRCI-MISC - HRI fuses provide both overload and short-circuit
protection, featuring offset blades for bolt down mounting.
• CIK HRCI-MISC - HRI fuses provide both overload and short-circuit
protection, featuring offset blades for bolt down mounting.
• CIL HRCI-MISC - HRI fuses provide both overload and short-circuit
protection, featuring offset blades for bolt down mounting.
IEC
industrial ferrule fuses
• C08G (with indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C08G (without indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C08M (with indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C08M (without indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C10G (with indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C10G (without indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C10M (with indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C10M (without indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C14G (with indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C14G (with striker) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C14G (without indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C14M (with indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C14M (with striker) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C14M (without indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C22G (with indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C22G (with striker) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C22G (without indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C22M (with indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C22M (with striker) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
• C22M (without indicator) - IEC ferrule fuses are available in physical
sizes and amp ratings for system voltages of 250, 380, 400, 500 &
690Vac.
NH
low voltage fuses
• NH_G-690 - A range of industrial fuses for a wide variety of
applications where 690V is needed.
• NH_M - A range of industrial fuses for the protection of motor
circuits.
NH HRC
DIN square bodied fuses
• ___NHG___B - DIN square bodied, dual indication industrial fuses.
Tron® HRC Form II
Class C fuses
• CGL Form II Class C - Current-limiting HRCII-C fuses designed to
withstand inrush currents on typical motor start-ups while offering high
current limitation in the short-circuit region.